HOME sm05726 6. See Figure 2-112 . Remove collar and spring from fork assembly. 7. Remove fork from vise and drain fork oil into a suitable container by tipping fork upside down and stroke cartridge plunger to remove excess fork oil. 1 sm03139 2 3 1. Fork cap 2. Retaining nut 3. Keeper Figure 2-111. Remove Keeper Figure 2-113. Remove Fastener and Copper Washer 4. See Figure 2-111 . Remove keeper and loosen retaining nut, and fork cap from cartridge assembly. Always use soft jaws for bench vise when placing any fork components into vise to prevent damage to components. NOTE 5. Remove Front Fork Compressor. 8. See Figure 2-113 .
Place fork slider into bench vise with soft-jaws and remove fastener and copper washer from sm03138 bottom of fork assembly. sm03140 Figure 2-114. Cartridge Assembly 9. See Figure 2-114. Reposition fork in vise using FORK TUBE HOLDER (Part No. HD-41177) to remove cartridge assembly from fork slider. Figure 2-112. Remove Collar, and Spring Assembly 2-88 2009 VRSC Service: Chassis e Collar, and Spring Assembly e: Chassis Figure 2-112. Remov 2-88 2009 VRSC Servic