HOME 2.41 REAR FENDER: VRSCF REMOVAL 1. Remove right side cover. 2. Remove maxi-fuse. 3. Open seat. To prevent accidental vehicle start-up, which could cause death or serious injury, remove main fuse before pro- ceeding. (00251b) 4. See 2.39 SEAT . Remove fasteners and passenger pillion. SM06208 6 4 3 5 2 1 1. Rear fender, outer 2. Screws, rear fender mounting (4) 3. Rear turn signals and license lamp [94B] 4. Tail/stop lamp [93B] 5. License lamp (two pin connector) 6. Tail lamp/turn signal assembly Figure 2-170. Rear Fender/VRSCF 5. Unplug the ECM. 7. Remove electrical caddy and four fasteners (2) and washers from fender.
Remove rear fender (1) from inner fender by lifting upward and sliding fender back. 6. See Figure 2-170 . Unplug the three connectors (3, 4 and 6) coming from the tail lamp and license lamp. 2-114 2009 VRSC Service: Chassis