English 2. Turn on the printer, open the printer cover, and insert the paper roll as shown in illustration 5 below. Note the direction the paper comes off the roll, which is shown in illustration 6 below. 4 5 6 3. Open the autocutter by pulling the tab up and toward you as shown in illustration 7 . 7 8 4. Hold both edges of the paper and insert it straight into the paper slot, as shown in illustration 8 . The printer feeds the paper automatically. 5. If you are not using a take-up spool, tear off the paper, close the autocutter, and close the printer cover. You can then skip steps 6 through 8. 6 TM-U200 Series User’s Manual