Brought to you by BirfMark IN−12 − INTRODUCTION FOR ALL OF VEHICLES (e) FRONT PASSENGER AIRBAG ASSEMBLY (1) Always store a removed or new front passenger air- bag assembly with the airbag deployment direction facing up. Storing the airbag assembly with the airbag deploy- ment direction facing down could cause a serious accident if the airbag inflates. (2) Never measure the resistance of the airbag squib. (This may cause the airbag to deploy, which is very dangerous.) (3) Grease should not be applied to the front passen- ger airbag assembly and the airbag door should not be cleaned with detergents of any kind.
(4) Store the airbag assembly where the ambient tem- perature remains below 93 ° C (200 ° F), without high humidity and away from electrical noise. (5) When using electric welding, first disconnect the air- bag connector (yellow color and 2 pins) installed on the assembly before starting work. (6) When disposing of a vehicle or the airbag assembly alone, the airbag should be deployed using an SST before disposal (See page RS−25 ). Perform the operation in a safe place away from electrical noise. o Example: CORRECT WRONG R08766 Z13952 Example: R05648 R05649 R06952 Z13951 1996 LAND CRUISER (RM451U) 12 Author : Date: Brought to you by BirfMark Version 1.11 - 03/16/2010