Reseting Wi-Fi When switching to a new router or changing your Wi-Fi password, you will need to reset the vacuum-mop's Wi-Fi connection. To do so, turn on the vacuum-mop, then simultaneously press and hold the butons and for 7 seconds until you hear a voice saying "Reseting the Wi-Fi connection and entering network configuration mode". Once the Wi-Fi connection is reset, you can reconnect the vacuum-mop. Note: Only 2.4 GHz Wi-Fi networks are supported. Cleaning up all areas If you choose to clean up all areas when no map is saved, the vacuum-mop will clean square-shaped areas of 6 Ч 6 meters one by one.
Afer a map has been saved in the app and you select to clean up all areas, the vacuum-mop will automatically clean each room according to the planned route. And it will return to the charging dock afer the cleaning is completed. Saving maps Afer the vacuum-mop quickly creates a map or returns to the charging dock to charge afer completing a cleaning task, the updated map will be automatically saved in the Mi Home/Xiaomi Home app. Once a map has been created, you can use the app to split or merge areas, or customize room names. Reseting/Restoring the system To reset the system: Use a pin to press and hold the reset buton for 3 seconds until you hear a voice saying "System reset successfully".
Then the vacuum-mop will automatically restart, and the setings such as scheduled cleanup and Wi-Fi connection will be restored to their original factory setings. To restore the system to the previous firmware version: Use a pin to press and hold the reset buton for 10 seconds until you hear a voice saying "System restored successfully". Then the vacuum-mop will automatically restart, and the setings such as scheduled cleanup and Wi-Fi connection will be restored to their original factory setings. Note: Afer reseting or restoring the system, the vacuum-mop needs to be reconnected to the app, and the relevant setings in the app will be cleared.
Edge cleanup Afer you select the edge cleanup in the app, the vacuum-mop will automatically identify the area to be cleaned and clean along the edges. Afer cleaning, the vacuum-mop will automatically return to the charging dock to charge. Zoned cleanup You can set up a zoned cleanup in the app, and the vacuum-mop will clean the areas you select. Note: Zoned cleanup cannot completely keep the vacuum-mop inside the selected areas during cleaning. Remove any obstacles around the areas prior to cleaning in case the vacuum-mop goes out of the selected areas. Selecting modes/water levels You can select different modes and water levels in the Mi Home/Xiaomi Home app.
Do not disturb (DND) mode In DND mode, the vacuum-mop will not resume the cleanup, perform scheduled cleanup, or issue voice alerts. DND mode is enabled by default from 11:00 p.m. to 9:00 a.m. and can be disabled in the app. Note: In DND mode, the vacuum-mop's indicator will go off afer the vacuum-mop being charged for 1 minute. Clean there You can use the clean there feature in the app to set a target point on the map. The vacuum-mop will automatically navigate to the target point and clean a square-shaped area of 2 Ч 2 meters with the target point as the center. 12