186 F3B ENGINE T RAKKER E URO 4/5 SELECTING THE MAIN BEARING SHELLS (GROUND JOURNALS) If the journals have been ground, the procedure described so far cannot be applied. In this case, it is necessary to check that the new diameter of the journals is as shown in the table and to mount the only type of bearing shell envisaged for the relevant undersizing.
Figure 91 red/black = mm 3.173 to 3183 -0.127 green/black = mm 3.184 to 3.193 1 2 3 99.843 99.852 CLASS green/black green/black green/black 1 green/black green/black green/black 99.853 99.862 red/black green/black green /black 2 red/black green/black green/black 99.863 99.873 red/black red/black green/black 3 red/black red/black green/black -0.254 red = mm 3.237 to 3.247 1 2 3 99.726 99.746 red red red red red red -0.508 red = mm 3.364 to 3.374 1 2 3 99.472 99.492 red red red red red red Base q November2006 Print 603.93.641