T Print 603.93.641 Base q November 2006 KKER EURO 4/5 F3B ENGINE 205 Figure 150 108841 MAIN DATA OF THE CAMSHAFT AND TOLERANCES The surfaces of the supporting pins of the shaft and those of the cams need to be extra smooth. Whereas, if they show any signs of seizing or scoring, you should replace the shaft and the relevant bushings.
TOLERANCES FEATURE SUBJECT OF TOLERANCE SYMBOL DIRECTION Perpendicularity POSITION Concentricity or coaxiality SWING Circular oscillation CLASS OF IMPORTANT ASCRIBED TO PROD UCT CHARACTERISTICS SYMBOL RUCIAL MPORTANT ECONDARY 1213 Bushings Figure 151 60627 MAIN DATA OF THE BUSHINGS FOR THE CAMSHAFT AND SEATS ON THE CYLINDER HEAD * Bushing inside diameter after driving in e surface of the bushings must show no sign of seizing or If you find a higher value than the tolerance, replace them. oring; replace them if they do. To remove and fit the bushings, use the appropriate drift easure the inside diameter of the bushings with a bore 99360499. uge.