F3B ENGINE 211 T RAKKER E URO 4/5 PRINT603.93. 641/A Figure 171 Sealant application diagram. NOTE Mount the lower applying the sealant. 47579 (3), tighten the inside screws (1) to Nm. Then tighten them to an angle of 60 Figure 172 tool 99395216 (4) with another two phases. 173) with closure to an 99395216 (4). Mount the lower crankcase hooks. Figure 173 Use new screws bed-plate. NOTE By torque wrench at 30 Nm torque observing the schemes at Print 603.93.641/A Base q November 2006 Revi - June 2007 60632 Figure 174 Using a torque wr a torque of 120 N and 55 with tool Regrind the outsid angle of 60 using kcase within 10 min.
of 60559 sing appropriate tackle and 47581 henever removing the outer Hex splined screws chemes at next page.