F2B ENGINE 49 T RAKKER E URO 4/5 PRINT603. 93.641 Figure 28 87204 Block the flywheel rotation with tool 99360351. Remove screws (4), then disassemble damper (3). Remove the screws (2) and the pulley (1). Figure 29 Install extractor 99340051 (2) and remove the seal gaskets (1). Unscrew the screws and remove the cover. Disconnect all electric connections and sensors. 45254 Print 603.93.641 Base q November2006 Figure 30 47566 Remove the following components: oil supply lines (1); water cooling supply lines (3); water discharge lines (2); oil return lines (4); turbocharger (5); exhaust manifold (6). Figure 31 87205 Unscrew the oil filter (1) by tool 99360314 (2).
Figure 32 87206 Unscrew the screws (1) and remove the entireheat exchanger (2).