hp Color 9850mfp PROCESS UNIT 5. With the handle [1] raised up, remove the trans- fer belt unit [2]. [1] [2] Note: • Be careful not to touch and damage the trans- fer belt [3] with bare hands. • Make sure to grab both ends of the handle of the transfer belt with both hands. [3] 6. Set the supporting rod [2] to the transfer belt unit 7. Reinstall the above parts following the removal [1] to allow it to self stand. III DIS./ASSEMBLY steps in reverse. Note: • Make sure not to touch and damage the trans- fer belt unit with the drum at installation. [1] [2] 3-35