hp Color 9850mfp TONER SUPPLY 5. TONER SUPPLY 5.1 toner supply section Opening and closing the A. Procedure 1. Open the front door [1]. 2. Loosen the screw [2] and open the toner supply section [3]. Note: • With the toner supply section left open, be sure not to apply force to the toner supply sections such as the operation board. If applied, the hinge of the toner supply section may be deformed. • When closing the toner supply section, tighten the screw with a hand before using a driver to prevent stripping the thread. [1] [2] [3] III DIS./ASSEMBLY 3. Remove once the door lock [2] provided on the inside of the toner supply unit [1] and replace 4.
Close the front door following the steps for it at a new position where it becomes a stopper. opening in reverse order. Note: • When the toner supply section is opened, be sure to replace the door lock to a new position where it becomes a stopper and prevent it from getting in touch with the process unit when being pulled out. [2] [1] [2] [1] 3-55