hp Color 9850mfp PAPER FEED TRAYS 1 to 3 6.5 Replacing the paper feed clutch and the pre-registration clutch A. Periodically replaced parts/cycle • Paper feed clutches 1 to 3 (MC7, MC9, MC11): Every 4,000,000 copies (Every 2,000,000 copies in actual replacement count) • Pre-registration clutches 1 to 3 (MC8, MC10, MC13): Every 4,000,000 copies (Every 2,000,000 copies in actual replacement count) B. Procedure Note: • Since the composition of the paper feed trays 1 to 3 is the same, the explanation her is made of the steps for the paper feed tray /1. 1. Pull out the paper feed tray 1. III DIS./ASSEMBLY 2. Remove the paper feed unit. 3. Remove 2 connectors [1]. [6] 4.
Remove a stop ring [2] and then remove the MC7 [3]. 5. Remove a stop ring [4] and then remove the MC8 [5]. [3] 6. Reinstall the above parts following the removal steps in reverse. [2] Note: • When reinstalling the clutches, be sure to check that the stopper [6] of each clutch is in the specified position. [1] [5] [4] 3-63