FIXING hp Color 9850mfp C. Procedure (for removing and reinstalling the fixing temperature sensor 1) 1. Remove a screw [1] and then remove the mounting board [2] of the fixing temperature [1] [2] sensor 1. 2. Remove a screw [1] and then remove the fixing III DIS./ASSEMBLY temperature sensor 1 [2]. [2] [1] Note: • Be careful not to change the position of the • Be careful not to damage the internal surface set screw of the fixing temperature sensor 1. of the sensor. • A positioning jig is not used when reinstalling it. 3. Reinstall the above parts following the removal steps in reverse. D. Procedure (for removing the thermostat 1) 1.
Remove 2 faston terminals [1] and 2 screws [2] mostat section. of the thermostat 1 and then remove the ther- [1] [2] [1] 3-90