STACKER Q5686A/Q5687A B. Stacker entrance conveyance control (1) Staple mode (other than A4, B5, 8.5 x 11 in size, with no by-pass) rotate at high speed. An finisher operation start signal from the finisher turns on the stacker entrance motor (M713) to start to The moment the stacker entrance sensor (PS705) detects the trailing edge of paper, M713 changes to the low speed rotation, and the stacking assist roller starts to rotate at low speed to convey paper to the stacker. When any paper is conveyed after the first ten sheets of paper have been sent, the stacking assist solenoid also operates.
A specified period of time after a low speed rotation starts, M713 resumes a high speed rotation to stand by for the conveyance of the next page. II UNIT EXPLANATION After passage of the last paper of the copy, M713 stops upon the start of the stapling operation. The moment the paper exit opening (M708) completes the closing operation, M713 turns on to return to the high speed rotation and stands by for the paper conveyance for the next stapling.
[1] [5] Stapling operation Finisher operation start signal ON [2] First 9 sheets of paper [6] Closing operation of the paper exit opening [3] Paper conveyance to the stacker at low [7] Standing by for the paper of the next copy speed [4] Sheets of paper conveyed after the first 9 sheets have been sent 2-22 [2] [4] [7] Stacker entrance sensor (PS705) Stacker entrance motor (M713) High speed Low speed Stacking assist motor (M722) Stacking assist solenoid (SD702) Staple (M709, M710, M714, M715) Paper exit opening motor (M708) [1] [3] [5][6]