Q5690A TRAY UP/DOWN 2. Remove an E-ring [1]. 3. Remove 5 screws [2]. [2] 4. Remove 2 bearing [3] and then remove the guide plate [4]. [2] [3] [1] [4] III DIS./ASSEMBLY 5. Remove the gear [1]. Note: • When reinstalling this gear, be sure to make the positioning adjustments of the remaining paper detection gear at this step. For position- ing adjustments, see "D. Reinstalling the rear drive." 6. Remove an E-ring [2] and a pin [3] and then remove the gear [4]. [3] [2] [4] [1] 7. Remove an E-ring [1], and then remove a bear- ing [2], the gear [3] and a bearing [4]. [3] 8. Remove an E-ring [5] and then remove the gear [6] and a pin [7]. [4] [1] [5] [6] [7] [2] 3-13