Removing the right cover subassembly Note Use this procedure if you want to separate the right cover subassembly from the right upper cover. 1 Open the right upper cover assembly slightly. 2 Pull the right side of the subassembly slightly to the right and pull outward on the right side to snap it out of place. 3 Move the subassembly slightly to the left and to remove it. Note There is a small spring on the left side of the subassembly—be careful it does not fall off. Notes about reinstalling: If the spring falls off the subassembly, slide it onto the pin and through the slot on the left side of the subassembly. Figure 92.
Spring on right cover subassembly 240 Chapter 6 - Removal and replacement EN