Removing the right lower cover assembly 1 Remove the front right cover (see page 229). 2 If you have a 2,000-sheet input unit, open the VTU. 3 Remove the right rear cover (see page 241). 4 Remove four screws on the right lower cover in place (callout 1). 21 Figure 94. Screws on the right lower cover 5 Unfasten the holding strap on the right. 6 Remove tray 2 and tray 3, and release the locking tabs inside the tray 3 area. 7 While holding the cover in place, push down to release the tabs on the top of the cover and pull out on the bottom of the cover. Notes about reinstalling:
Insert the tabs on the top of the cover in the corresponding holes first, then snap the bottom of the cover into place. 242 Chapter 6 - Removal and replacement EN