5 Unplug three connectors (figure 168, callout 3). 6 Use a flat-blade screwdriver to release the plastic retaining tab that secures the assembly to the top of the frame (callout our). 4 2 5 2 Figure 170. Flipper assembly (3 of 3) 7 Hold down the jam access door (callout 5) and pull the assembly out. Hold down the jam access door to reconnect the ground wire to the flipper motor (callout 2). Notes about reinstalling: CAUTION Do not over-tighten the screws that secure the flipper assembly to the multi-bin mailbox frame. The nuts in the flipper assembly can rotate in their slots. 320 Chapter 6 - Removal and replacement EN