• Replace the RAM card battery yearly. • When you want to replace a RAM card battery, plug the card into the OmniBook and make sure the OmniBook stays turned on while you replace the battery. Otherwise, the data on the card will be lost. • To use an SRAM card, you must first load drivers for it. Refer to the online Help for Windows 95. Using Sound Your OmniBook supports Sound Blaster PRO-compatible sound (16-bit stereo). This section shows how to • Adjust the speaker volume. • Connect a microphone, speakers, or headphones. • Play and record sounds. To change speaker volume The speaker volume setting controls loudness for all sounds except Appointment Book alarms.
You can adjust the volume using these methods: • Hold FN and press UP ARROW or DOWN ARROW as needed to gradually increase or decrease the volume. • Press FN+SPACEBAR to mute the sound (or to turn it back on). • Click the speaker symbol in the taskbar to display the Volume panel, then drag the main volume control. • Double-click the speaker symbol in the taskbar to display the Volume Control panel for advanced control of different sound inputs. To connect a microphone, speakers, or headphones Your OmniBook has a built-in microphone above the keyboard and two speakers. Although the OmniBook has stereo sound, both built-in speakers play a mix of the right and left channels.
You can also plug in an external microphone, external speakers or headphones, and a stereo input source. 22