Single-axis controllers Wiring Devices in the range 145 ... 695 A (75 ... 400 kW) 4 4.6 4.6.5 Motor temperature monitoring Motor brake control (optional) Stripping length or contact length: 8 mm 4.6-37 EDS94SPP101 EN 3.1-04/2007 Terminal X106 Labelling Description T1 T2 Terminal data Max. conductor cross-section Tightening torque Screw drive [mm2] [AWG] [Nm] [lb-in] Flexible 2.5 12 0.5 ... 0.6 4.5 ... 6.2 Slot 0.6 x 3.5 With wire end ferrule Terminal X107 Labelling Description SSP94X6107 BD1 BD2 Connection of the motor holding brake + (Lenze: WH) - (Lenze: BN) E94AZHY0101: 24 V DC, max. 5.0 A Observe correct polarity! + / - Supply voltage for the motor holding brake (18 ...
30 V DC) Observe correct polarity! Terminal data Max. conductor cross-section Tightening torque Screw drive [mm2] [AWG] [Nm] [lb-in] Flexible 2.5 12 0.5 ... 0.6 4.5 ... 6.2 Slot 0.6 x 3.5 With wire end ferrule Terminal X107 Labelling Description SSP94A6107 Connection of the motor holding brake: BD1 BD2 + (Lenze: WH) - (Lenze: BN) E94AZHY0025: 205 V DC, max. 0.75 A Ensure correct polarity! L1 L2/N Supply voltage of the motor holding brake Terminal data Conductor cross-section Tightening torque [mm2] [AWG] [Nm] [lb-in] Flexible 0.5 ... 2.5 20 ... 12 Spring terminal With wire end ferrule