5 5.4 5.4.1 Multi-axis controllers Mechanical installation Important notes Mounting grid We recommend to provide the mounting plate with a grid pattern of M5 threaded holes for attaching the devices. This preparation enables easy attachment of the devices and the device sizes 1, 2, ... n can thus be mounted directly adjacent to each other. Note! ƒ M5 screw and washer assemblies or hexagon socket screws with washers are permitted. ƒ Tightening torque: 3.4 Nm / 30 lb-in. ƒ In the installation backplane, the screwed connection may not jut out more than 7 mm.
Mounting with backplane for attaching the power supply module Grid hole pattern for installation backplane Grid hole pattern for other device sizes or built-on/footprint filters (only Single Drive) Cable duct SSP94PN010 1 ... 3 Device size, mounting holes used 5.4-2 EDS94SPP101 EN 3.1-04/2007