DC power supply modules Mechanical installation Devices in the range 100 ... 245 A (48 ... 119 kW) 6 6.5 6.5.3 Arrangement of the devices +UG -UG M 3~ +UG -UG +UG -UG SSP94FF003 Fig. 6.5-2 Arrangement concept Standard mounting: Side-by-side mounting Mounting variant: On top E94AZxPxxxx Filter E94APNExxxx 9400 DC power supply module E94AZEX100 DC input module E94AZPxxxxx Mounting base - 9400 axis module The technical data must be taken into account when planning and dimensioning a DC-bus interconnection. Arrange the devices as follows for operation in DC-bus interconnection via the DC busbars: ƒ Mount the devices side by side from the left to the right.
ƒ Install the supplying device on the left side: – DC power supply module (in a first row), – DC feeding point (in following rows). ƒ Install the Multi Drive axis controllers from left to right with decreasing powers. ƒ Single Drive axis controllers can be integrated to increase the braking power. These axis controllers must be equipped with the optional busbar set (E94AZJAxxx). 6.5-7 EDS94SPP101 EN 3.1-04/2007 E94AZxPxxxx E94AZxPxxxx E94APNExxxx E94AZPxxxxx E94AZPxxxxx E94AZEX100 E94AZPxxxxx E94AZPxxxxx