6 6.6 6.6.6 DC power supply modules Wiring Terminal assignment 6.6.6 Terminal assignment Tip! Complete the wiring of the installation backplane before plugging in the standard device. The upper terminals of the installation backplane cannot be connected with a plugged-in standard device. Mains 6.6-6 EDS94SPP101 EN 3.1-04/2007 Terminal X111 (left part) Labelling Description SSP940X111 L1 L2 L3 Connection of the mains phases L1, L2, L3 Connection for the supply-side PE conductor with M5 ring cable lug Terminal X112 (right part) Labelling Description SSP940X112 L1 L2 L3 Alternative connection at the bottom:
mains phases L1, L2, L3 Connection for the supply-side PE conductor with M5 ring cable lug Terminal data Max. conductor cross-section Tightening torque Screw drive [mm2] [AWG] [Nm] [lb-in] Device sizes 1+2: flexible with wire end ferrule 2.5 12 0.5 ... 0.6 4.5 ... 6.2 PZ0 Device size 3: flexible with wire end ferrule 10 6 1.2 ... 1.5 10.6 ... 13.3 PZ1