Chapter 8 Serial Communication Module AH10SCM (2) Creating a group Editing TX packets and RX packets Creating commands Creating other groups Creating sequences Downloading the sequences, and then triggering the sending/receiving of the packets First, create TX packets and RX packets in a group. Then, set the sequence of sending/receiving the packets, and the number of times the packets are sent/received through commands. Finally, the sending/receiving of the packets in the group is triggered.
Besides, if several different types of packets are required in a larger system, users can arrange several groups in sequence, and set the sequence of sending/receiving the packets in the groups. 8.6.3.1 TX Packets and RX Packets Several TX packets and RX packets can be created in a group. A TX packet/RX packet is composed of messages, an address, a length, and a checksum. Packet name: Users can edit a packet name. Packet view: The contents of a packet are displayed. Packet segment edit: Users can adjust the sequence of segments, and add/delete segments. No.: A segment number is displayed. Users can edit 64 segments at most. Class: A segment class is displayed.
A message, an address, a length, and a checksum are 8-29