AH500 Module Manual Delta network products related with DeviceNet bus: 10-10 Product picture Type Function AH10DNET-5A AH10DNET-5A, a DeviceNet module, running on the I/O slot of an AH500 series main backplane can work as the DeviceNet master or slave. AHRTU-DNET-5A AHRTU-DNET-5A, a remote I/O module, is used for connecting an AH500 series DI/DO module, AI/AO module and 10SCM module to the DeviceNet network. DVPDNET-SL DVPDNET-SL, a DeviceNet module, running on the left of an S series PLC can work as the DeviceNet master or slave. RTU-DNET RTU-DNET, a remote I/O module, is used for connecting S-series DI/DO module, AI/AO module and other device to the DeviceNet network.
IFD9502 Used for connection between the DeviceNet network and electromechanical equipment such as AC motor drive, PLC, temperature controller, servo drive, HMI, user-defined device. IFD6503 The bus data analysis tool, with one end of CAN interface and the other end of USB interface can be used for getting the CAN bus data or sending the data to the CAN bus node. It is used with the Netview Builder software together. E series AC motor drive Used for connecting the AC motor drive to the DeviceNet network via CME-DN01 card