AH500 Motion Control Module Manual 14. AH10PM-5A 1 14 2-16 2 4 8 9 RU N ERROR ETH 3 10 5 6 7 STOPRU N CN1 Micro SD hernet 13 11 12 Number Name Description 1 Model name Model name of the module Operating status of the module RUN LED indicator 2 ON: The module is running. (green) OFF: The module stops running. ERROR LED Error status of the module 3 indicator (red) Blink: The module is abnormal. Ethernet connection Status of the Ethernet connection 4 LED indicator ON: The Ethernet connection is being connected. (green) OFF: The Ethernet connection is disconnected. 5 USB port Providing the mini USB communication interface RUN: The user program is executed. 6 RUN/STOP switch STOP:
The execution of the user program stops. 7 SD slot Providing the SD interface 8 I/O Connector Connectors for pulse input/output 9 Ethernet port Providing the Ethernet communication interface 10 Extension port Used for Used for updating the firmware 11 Label Nameplate 12 Set screw Used for securing the module 13 Connector Connecting the module and a backplane 14 Projection Used for securing the module