AH500 Programming Manual 3.2.2 Applied Instructions The descriptions: : The applied instruction number : The instruction name : If the 16-bit instruction can be used as the 32-bit instruction, a D is added in front of the 16-bit instruction to form the 32-bit instruction. : indicates that the instruction can be used as the pulse instruction, whereas ─ indicates that it can not. If users want to use the pulse instruction, they only need to add a P in back of the instruction. : The symbol used in the ladder diagram in ISPSoft : The function :
If the 32-bit floating-point number instruction can be used as the 64-bit floating-point number instruction, a D is added in front of the 32-bit floating-point number instruction to form the 64-bit floating-point number instruction. 3-4