AH500 Quick Start If the CPU module which is actually connected is different from the setting in ISPsoft, the HWCNFIG window will appear. Users have to make sure that the CPU module which is actually connected is the CPU module to which the hardware configuration and the CPU parameters will be downloaded. After users click Yes , the hardware configuration and the CPU parameters will be downloaded to the CPU module. After the hardware configuration and the CPU parameters are downloaded to the CPU module, the error LED indicator on the CPU module will not be ON. After the downloading of the parameters is complete, please close the SPW-HWCONFIG window.
(If users use a network module or a motion control module, they have to open the corresponding software to download the related parameters.) 3.2.3 Downloading the Program After the hardware configuration is downloaded, users can begin to download the program. The project has been compiled previously. If the program is modified, users can click to check the syntax. After the compiling of the program is successful, users can click to download the program. There are several transfer options in the Transfer Setup window. The object code is the necessary condition for the operation of the CPU module, and therefore the Object Code checkbox is selected.
In order to maintain the program, the Program checkbox and the Comments checkbox are selected in this example. The current project will be backed up in the CPU module, and the program will not be lost. Besides, if users want to modify the program on the spot, and forget to bring the original program, they can upload the original program from the CPU module to the computer to modify the program. After users click OK , the downloading of the program is complete. Finally, check the I/O LED indicator on the module and the status of the equipment. After users make sure that the whole system can be tested, they have to switch the CPU module on so that the CPU module starts to run. 3-8