This chapter guides you through setting up your system. Read the instructions carefully. Choose a location for your system away from heat, dust, smoke, vibration and electrical interference. Choose a stable work surface at least 15 cm away from a wall. The ventilation slots on the back of the main unit must not be blocked. Have on hand a multi-outlet power strip with surge protection. (These units are available from most computer stores.) Commodore strongly recommends that you use this type of outlet to protect your system from electrical problems. Make sure your equipment matches the electrical requirements for the country in which you are using the computer.
For example, you can't use a 110/115 volt model in countries having a 220/240 volt system. Read the descriptions in this chapter to acquaint yourself with the purpose and function of each feature and connector. If possible, plug your system into a separate circuit to avoid any electrical interference. Voltage surges and drops caused by As you unpack your system, check the items in the system box. Contact your dealer immediately if anything is damaged. As You Set Up Your System Chapter 1 Quick Connect Before You Begin