AOC-LPZCR2 All-In-One Card User's Manual 3.1 Using the Adaptec Array Confi guration Utility The Adaptec RAID Confi guration Utility includes the following major compo- nents: 1. Array Confi guration Utility: this utility allows the user to create and manage arrays. You can also use this utility to initialize and scan disk drives. 2. SCSISelect Unity (or Serial/SATASelect): this utility allows the user to confi gure the control settings for disk drives. 3. Disk Utility: this utility allows the user to format and verify disk drives. To Use the Adaptec RAID Confi guration Utility (*Note:
the confi guration procedures listed below are applicable to SAS, SATA and SCSI settings.) To use the Adaptec RAID Confi guration Utility, please follow the steps listed below. 1. Properly confi gure the jumper settings of your add-on card as indicated on page 3-1. 2. Enable the RAID function in the system BIOS. (*Please refer to the User's Guide that came with your system for system BIOS confi guration.) 3. Turn on your computer. The BIOS screen as shown below will display during system bootup: 3-2