AOC-LPZCR2 All-In-One Card User's Manual 8. Under "Arrays Label," you type in the name you wish to identify a disk drive, and press . 9. For RAID 0, select the desired stripe size. (You can select: 16, 32, 64, 128, 256, 512, 1024 KB. The default setting is 256 KB. Please do not change the default setting.) 10. You can also use the item "Create RAID via" to select the different methods under RAID 0, RAID 1, RAID 5, RAID 10 and RAID 50. 11. Press to return to the previous menu. (*Note:
Once the array is created and its properties are assigned, you cannot change the properties by using Array Confi guration Utility.) To Manage Arrays The item "Manage Arrays" allows you to view, delete, set a boot array and cre- ate hot spare drives. 1. Turn on your computer. When prompted, press and to access the Adaptec RAID Utility. 2. From the RAID Confi guration Menu (Figure 3.1 on Page 3-3), select "Array Confi guration Utility" and press . The Array Confi guration Utility Main Menu displays as shown below. 3. From the Main Menu, select "Manage Arrays" and press to access the Manage Arrays submenu as shown below. 3-6