AOC-LPZCR2 All-In-One Card User's Manual Using the Controller Confi guration Utility 3. To confi gure the SAS RAID Controller or view the settings, select "Controller Confi guration" from the submenu and press . 4. To confi gure an item on the submenu, use the arrow keys to select the item and press . A dialogue box will appear. 5. Select the desired setting in the dialogue box and press to select the option. 6. Press to restore the default setting. Press to return to the previ- ous menu. Using the SerialSelect Confi guration Utility to Confi gure SAS Settings 1. Turn on your computer. When prompted, press and to access the Adaptec RAID Confi guration Utility. 2.
From the RAID Confi guration Main Menu (Figure 3.1 on Page 3-3), select "SerialSelect Utility" and press . Using the Controller Confi guration Utility 3. From the SerialSelect submenu, select SAS Confi guration and press . The status of SAS Device Confi guration will display. 4. Use the arrow keys to select the item you wish to confi gure and press . A option dialogue box will display. 5. Use the arrow keys to select the desired setting and press . 6. Press to load the default setting. To return to the previous menu, press . (* Note : Refer to Section 3.2.4 on Page 3-25 for Physical Confi guration Settings.) 3-24