Chapter 3: RAID Confi guration 3.3.2.2 To Verify Disk Media 1. Power on your computer. When prompted, press the and keys simultaneously to access the Adaptec RAID Confi guration Utility. From the RAID Confi guration Main Menu, select "Disk Utilities" and press . After disk scan, the following screen displays: 2. When a dialogue box as shown above displays, prompting you to make a selection, select the disk you wish to verify and press . 3. Then, select "Verify Disk Media" from the displayed dialogue box and press . 4.
A dialogue box appears, showing you the status of the disk drive, and warn- ing you that the disk drive selected will be scanned for media defects, and all recoverable defects will be remapped. 5. Press to continue with disk drive verifi cation. Press to return to the previous menu. (*Note: This procedure can take up to several hours. The time required for the process depends on the disk size.) 3.4 To Exit the Adaptec RAID Confi guration Utility Once you have fi nished confi guring RAID array disk drives, press to re- turn to the Exit Menu. Select Yes and press to exit the Adaptec RAID Confi guration Utility. 3-29