AOC-SIMLC/SIMLC+ User's Guide 3. Network Basic Settings: 7KLVZLQGRZDOORZV\RXWRFRQїJXUHEDVLFVHWWLQJVIRU your network. ,3$XWR&RQїJXUDWLRQ Click on the box to activate the selection menu and select a desired item from the list. The options are None, DHCP, and BOODP. 3UHIHUUHG+RVW1DPH'+&3RQO\ Enter a Preferred Host Name in the box. 6. IP Address: Enter the IP Address for the remote host in the box. 7. Subnet Mask: Enter the net mask of the local network in the box. 8. Gateway IP Address: Enter the local network router's IP address in this box for the accessibility of the users that are not connected to the local network. 9. Primary DNS Server IP Address:
Enter the IP Address of the Primary Domain Name Server in the box. 10. Secondary DNS Server IP Address: Enter the IP Address of the Secondary Domain Name Server in the box. It will be used when the Primary DNS Server can- not be contacted. 11. Network Miscellaneous Setting: 7KLVїHOGDOORZVWKHXVHUWRFRQїJXUHWKHIRO - lowing Network Miscellaneous settings as listed below: 5HPRWH&RQVROH +77363RUW Enter the port numbers the remote host and the HTTP server are listening. If a number is not entered in the box, the default value will be used. +7733RUW Enter the port number the HTTP server is listening. If a number is not entered in the box, the default value will be used.
66+3RUW Enter the port number the SSH server is listening. If a number is not entered in the box, the default value will be used. 15. Bandwidth Limit: Enter the maximum bandwidth value for network interfacing. The value should be in Kbits per second. (QDEOH66+$FFHVV Click this box to enable SSH Access. 17. Disable Setup Protocol: Check this box to disable the function of Setup Proto- col for the SIMLC/SIMLC+ card. 18. LAN Interface Setting: 7KLVїHOGDOORZVWKHXVHUWRFRQїJXUHWKHIROORZLQJ/$1 Interface settings as listed below: 19. LAN Interface Speed: Click on the arrow on the right to activate the selec- tion menu and select a desired speed. The options are:
Auto-detect, 10 Mega bits per second or 100 Mega bits per second. If Auto-detect is selected, LAN Interface 6SHHGZLOOEHVHWDWWKHRSWLPL]HGVSHHGEDVHGRQWKHV\VWHPFRQїJXUDWLRQVGH - tected by the OS. 19. LAN Interface Duplex Mode: Click on the arrow on the right to activate the se- lection menu to select a desired LAN Interface Duplex Mode. The options are: Auto- detect, Half Duplex and Full Duplex. If Auto-detect is selected, the LAN Interface 'XSOH[0RGHZLOOEHVHWWRWKHRSWLPL]HGVHWWLQJEDVHGRQWKHV\VWHPFRQїJXUDWLRQV detected by the OS. 3-26