Configuring Application Hosting on Front-Panel VLAN Ports This task is applicable to Cisco IOS XE Amsterdam 17.1.1 and later releases. Note In application-hosting trunk-configuration mode, all the allowed AppGigabitEthernet VLAN ports are connected to a container. Native and VLAN-tagged frames are transmitted and received by the container guest interface. Only one container guest interface can be mapped to the AppGigabitEthernet trunk port. Concurrent configuration of both trunk and vlan-access ports are supported. SUMMARY STEPS 1. enable 2. configure terminal 3. interface AppGigabitEthernet number 4. switchport trunk allowed vlan vlan-ID 5. switchport mode trunk 6. exit 7.
app-hosting appid name 8. app-vnic AppGigabitEthernet trunk 9. vlan vlan-ID guest-interface guest-interface-number 10. guest-ipaddress ip-address netmask netmask 11. end DETAILED STEPS Procedure Application Hosting Configuring Application Hosting on Front-Panel VLAN Ports Command or Action Purpose Device(config)# username cisco privilege 15 password 0 ciscoI • The username privilege level must be configured as 15. Step 5 end Example: Device(config)# end Exits global configuration mode and returns to privileged EXEC configuration mode. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted.
Step 2 configure terminal Example: Enters global configuration mode. Application Hosting 15