Application Hosting Configuring Application Hosting on Front-Panel VLAN Ports Command or Action Purpose Device# configure terminal Step 3 interface AppGigabitEthernet number Example: Device(config)# interface AppGigabitEthernet 1/0/1 Configures the AppGigabitEthernet and enters interface configuration mode. • For stackable switches, the number argument is switch-number/0/1. Step 4 switchport trunk allowed vlan vlan-ID Example: Device(config-if)# switchport trunk allowed vlan 10-12,20 Configures the list of VLANs allowed on the trunk. Step 5 switchport mode trunk Example:
Device(config-if)# switchport mode trunk Sets the interface into permanent trunking mode and negotiates to convert the neighboring link into a trunk link. Step 6 exit Example: Device(config-if)# exit Exits interface configuration mode and returns to global configuration mode. Step 7 app-hosting appid name Example: Device(config)# app-hosting appid iox app _ Configures an application and enters application-hosting configuration mode. Step 8 app-vnic AppGigabitEthernet trunk Example: Device(config-app-hosting)# app-vnic AppGigabitEthernet trunk Configures a trunk port as the front-panel port for an application, and enters application-hosting trunk-configuration mode.
Step 9 vlan vlan-ID guest-interface guest-interface-number Example: Device(config-config-app-hosting-trunk)# vlan 10 guest-interface 2 Configures a VLAN guest interface and enters application-hosting VLAN-access IP configuration mode. • Multiple VLAN-to-guest interface mapping is supported. Step 10 guest-ipaddress ip-address netmask netmask Example: Device(config-config-app-hosting-vlan-access-ip)# guest-ipaddress 192.168.0.2 netmask 255.255.255.0 (Optional) Configures a static IP address. Step 11 end Example: Device(config-config-app-hosting-vlan-access-ip)# end Exits application-hosting VLAN-access IP configuration mode and returns to privileged EXEC mode. Application Hosting 16