Device> enable Device# configure terminal Device(config)# vtp mode off Device(config)# vlan 2508 Device(config-vlan)# exit Device(config)# interface vlan 2508 Device(config-if)# ip address 192.0.2.1 255.255.255.252 Device(config-if)# no shutdown Device(config-if)# exit Device(config)# interface AppGigabitEthernet 1/1 Device(config-if)# no switchport mode Device(config-if)# ip address 10.1.1.2 255.255.255.0 Device(config-if)# end This example shows a Layer 2 port used for ERSPAN traffic:
Device> enable Device# configure terminal Device(config)# vtp mode off Device(config)# vlan 2508 Device(config-vlan)# exit Device(config)# interface vlan 2508 Device(config-if)# ip address 192.0.2.1 255.255.255.252 Device(config-if)# no shutdown Device(config-if)# exit Device(config)# interface AppGigabitEthernet 1/1 Device(config-if)# switchport mode trunk Device(config-if)# end Example:
Enabling Multicast Routing on the AppGigabitEthernet Interface Device> enable Device# configure terminal Device(config)# app-hosting appid iox_app Device(config-app-hosting)# app-vnic AppGigabitEthernet trunk Device(config-config-app-hosting-trunk)# vlan 10 guest-interface 2 Device(config-config-app-hosting-vlan-access-ip)# guest-ipaddress 192.168.0.2 netmask 255.255.255.0 Device(config-config-app-hosting-vlan-access-ip)# multicast Device(config-config-app-hosting-vlan-access-ip)# exit Device(config-config-app-hosting-trunk)# exit Device(config-app-hosting)# app-default-gateway 172.19.0.23 guest-interface 0 Device(config-app-hosting)# end Additional References Related Documents Application Hosting Example:
Enabling Multicast Routing on the AppGigabitEthernet Interface Related Topic Document Title Programmability commands Programmability Command Reference DevNet https://developer.cisco.com/docs/app-hosting/ M2 SATA on Cisco Catalyst 9400 Series Switches M2 SATA Module Application Hosting 42