AS-4000 User’s Guide Product Overview ❏ Print settings shared folder Epson Edge Print Label This is a software RIP for Epson SurePress. It RIPs the print data and sends it to the press. By specifying the ICC profile created when the substrate was introduced as the output profile, you can adjust the output colors to the appropriate color for printing. In addition, by registering the spot color information, you can adjust and manage the output colors together when changing to a new substrate or changing the print settings. Press Creates and prints the color measurement chart required for color matching.
You can then perform color measurement on the printed chart using the color measurement unit. By checking the output accuracy of the spot color based on the color measurement results, you can keep output colors in their optimum condition. You can share the same print settings across multiple presses. This also allows you to perform color matching between presses by correcting individual differences between them. Color Measurement Unit Installed between the press and the rewinder. Inline color measurement is performed after printing the chart. You can check the color measurement results on the press or in Epson Edge Print Label.
Print Settings Shared Folder Use this folder to share various data created by Epson Edge Print Label or by the press with computers on which Epson Edge Print Label is installed and with all presses connected to the network. The following data is saved to this folder. ❏ Substrate No. ❏ Print Info. ❏ ICC Profiles ❏ Spot color values registered in Color Collection for Epson Edge Print Label 10