AS-4000 User’s Guide Basic Operations Preparing the Print Data Make the necessary settings for the print job in Epson Edge Print Label. If you are managing spot colors in a Color Collection group, set them in Quick Sets. c Important: Even if different Print Info. is set on the press, the Print Info. set in Epson Edge Print Label takes priority. A From the Job Settings menu, set the following items associated with color matching. B (Job Info) in the Job Settings menu, and then select the quick set you want to use for printing.
To specify a quick set, click 45 Check the light intensity for the substrate's base color area, and set the threshold if the light intensity is less than 4000 or the substrate is not white. U “Setting the Registration Mark Sensor Amplifier Threshold Value” on page 46 Press Press operator Example: Check the results of Check Job Spot Color Accuracy before printing or the results of the test print U “Starting Printing” on page 49 U “Checking the Results for Check Job Spot Color Accuracy” on page 49 Press Press operator Example:
Check the results of Check Job Spot Color Accuracy or the print results after printing or before and after printing U “Starting Printing” on page 49 U “Checking the Results for Check Job Spot Color Accuracy” on page 49 Press Press operator Item Explanation Basic Settings Select the preset you want to use for printing. Color Settings In the output settings, specify the ICC profile associated with the print settings.