Chapter 2 Installing Hardware 2.2 Warning Before a module is installed, please make sure of the size of the module. To ensure sufficient installation space, you must take into account the size of the communication cable connector and the room which needs to be reserved. Please make sure that the work environment conforms to the specifications for the products. It is necessary to 2_ take into account basic temperature/humidity control and dust/corrosion prevention. Electromagnetic interference can result in system malfunction. Therefore, you must design the EMC carefully. Please refer to Chapter 7 in this manual for more information on EMC standards.
If components such as screws and washers are specified in the manual, please use components conforming to the specifications. If a cable is connected to a communication port, please make sure the cable connector is properly joined to the port on the module. 2-11