AS Series Module Manual 2.1 Digital Input/Output Module Specifications 2.1.1 General Specifications Electrical specifications for the inputs on digital input/output modules (The signals passing through the inputs are 24 VDC signals.) _2 Electrical specifications for the outputs on a digital input/output module 2-2 08AM10N 16AM10N 32AM10N 64AM10N 16AP11R 16AP11T 16AP11P Module name -A -A -A -A A -A -A Number of inputs 8 16 32 64 8 8 8 Removable terminal block MIL connector Removable terminal block Connector type Input type Digital input Input form Direct current (sinking or sourcing) 24 VDC，5 mA 24 VDC 3.2 mA 24 VDC，5 mA Input voltage/ current Input impedance 4.7 k Ω 7.5k Ω 4.7 k Ω OFF→ON >15 VDC Action level ON→OFF Response OFF→ON time ON→OFF Software filter time Setting range:
0 ~ 25 ms; default: 10 ms Varies according to the filter time; for example when the filter is 1 ms, the maximum input frequency is 500 Hz, when 2 ms, 250 Hz. Note: CPU scan time also affects the maximum input frequency. Maximum input frequency Voltage input Sinking: The inputs are NPN transistors whose collectors are open collectors. Sourcing: The inputs are PNP transistors whose collectors are open collectors. Input signal Input Isolation 500 VDC Input display When the optocoupler is driven, the input LED indicator is ON.
Weight 100 g 117 g 100 g 140 g 138 g 120 g 120 g Model 08AN01 16AN01 16AP11 08AN0 116AN01 16AP11 08AN01 16AN01 16AP11 Item R-A R-A R-A T-A T-A T-A P-A P-A P-A Number of outputs 8 16 8 8 16 8 8 16 8 Connector type Removable terminal block Output type Digital output Output form Relay-R Transistor-T (sinking) Transistor-P (sourcing) Voltage/ current 240 VAC/24 VDC 5–30 VDC *2 5–30 VDC *2 0uA Leakage current Resistance 2A/output, 8A/COM 0.5A/output, 4A/COM 0.5A/output, 4A/COM Maximum Inductance Life cycle curve*2 12 W (24 VDC) 12 W (24 VDC) load 20 W (24 VDC) 100 W (230 VAC) 2 W (24 VDC) 2 W (24 VDC) Bulb Maximum Resistance 1 Hz 100 Hz 100 Hz