Chapter 5 Basic Instructions Symbol PLS D ： Specified device Explanation 1. When the conditional contact switches from OFF to ON, the PLS instruction is executed, and the device D sends out a pulse for a scan cycle. 2. Do not use the PLS instruction in function blocks. 3. ISPSoft V3.06.01 supports data type D and the BOOL type variable for declaration. 5_ Example When X0.0 is ON, M0 is ON for a pulse time. When M0 is ON, Y0.0 is set to ON. Timing diagram X0.0 One scan cycle M0.0 Y0.0 5-15 Instruction code Operand Function PLS D Rising-edge output Device DX DY X Y M SM S T C HC D D BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type D