Chapter 6 Applied Instructions S =3 (daylight saving time mode 2 enabled), S 4: settings for the week to end daylight saving time, S 2 +1: on which weekday of S 4 S 5 : settings for the change due to daylight saving time; unit: minute D : stores the state of the daylight saving time; when the value in D is OFF, daylight saving time is disabled. When the value in D is ON, daylight saving time is enabled. 2. Descriptions on the value in function code S for daylight saving time functions • Disabled daylight saving time function (refer to example 1 below) When the operand S is 0, the function of daylight saving time is disabled.
When S is set to disable the daylight saving time, the values in S 1 – S 5 are irrelevant and the operand D shows the daylight saving time state as OFF. • Enabled daylight saving time function (refer to example 2 and 3) When the value in S is 1 or 3, daylight saving time function is enabled: S 1 and S 2 : setting for the month to start daylight saving time; S 3 and S 4 : setting for the month to end daylight saving time; S 5 : settings for the change due to daylight saving time; unit: minute; the operand D shows the daylight saving time state.
When 6_ the function of daylight saving time is enabled and the system runs for the first time during the start time ( S 1 , S 2 ), the system time adds the value set in S 5 once. When the function of daylight saving time is disabled and the system runs for the first time during the end time ( S 1 , S 2 ), the system time subtracts the value set in S 5 once.
Modes for daylight saving 6-509 D.S.T State S Function Code Description Disabled 0 Disabled daylight saving time function Enabled 1, 3 Enabled daylight saving time function Read 2 Read the daylight saving time setting Mode S Function Code Rules Available for Mode 1 1 By month and date V1.00 or later Mode 2 3 By month and week V1.04 or later