Delta Electronics — 6.18.2 Explanation of Peripheral Instructions

AS Series Programming Manual 4. When a key connected to the input within the range between X0.0 and X0.9 is pressed, the corresponding output within the range between M10 and M19 is ON. 5. When one of the keys is pressed, M20 is ON. 6. When the conditional contact M0 is switched OFF, the value stored in D0 is unchanged; however, M10–M20 are switched OFF. X0.0 3 X0.1 4 X0.3 2 X0.5 1 M10 M11 M13 M15 Output signal _6 M20 1 2 3 4 Additional remarks 1. If you declare the operand S in ISPSoft, the data type is ARRAY [10] of BOOL. 2. If you declare the operand D 2 in ISPSoft, the data type is ARRAY [11] of BOOL. 6-526