5. With the power switch on the computer in the off position, insert the round plug of the AC adapter into the Power jack on your computer. Plug the other end into an electrical outlet. 6. Turn on your television and select channel 2 or 3, whichever is weaker in your area. Set the Channel switch on the back of your com- puter to the same channel. Turn on the power switch of your com- puter. In a few seconds you will see the word READY. REtlDV The Ready prompt tells you that ATARI BASIC is ready for your instruc- tions and that your computer is hooked up properly. If the Ready prompt does not show up on your screen, try adjust ing your television picture controls.
(For more information, see Appendix E: Troubleshooting.) When you leave your computer on for more than nine minutes without using the keyboard, the computer will start changing colors to protect the television from "co lor burn." Whenever you turn your computer off, wait a moment before turning it on again . CARING FOR YOUR ATARI 130XE • Wipe off dust with a moist, lint-free cloth. Do not use household solvents or cleansers on the computer. • Keep liquids away from the work area. • Avoid smoking near the computer. • Don 't move the computer more than is necessary. 8