omron — Enabling Emulation Mode

Enabling Emulation Mode l To remove a robot from the Installed Robots list, select the robot and then click the delete ( ) icon. 6. Click Save to complete the robot-selection process. 7. The emulated controller is rebooted and the selected robots are installed in the ACE workspace. Selected Robot Installed in the Emulated Workspace NOTE: When the emulation mode is active, the title bar shows "[Emulation Mode]", as shown in the previous figure. 8. If you selected a Quattro robot, you are prompted to select the desired platform for the robot, as shown in the following figure. ACE User's Guide, 3.6.x 18316-000 Rev A Page 1096