Pending Errors Log Pending Errors Log The Pending Errors log displays any errors that have occurred since the last ENABLE POWER command. It is used to view error messages describing why the robot powered off (or failed to power on). To access the Pending Errors log: 1. Open the Controller Editor. (For details, see the topic Controller Editor .) 2. From the menu, select View > Pending Errors . The Pending Errors log opens. Pending Errors Log The Pending Errors log shows the V+ error number on the left, followed by the error description. For example, if the emergency stop button is pressed, an indicator in ACE shows that power is off.
The Pending Errors log can be examined to find out why the power is off, as shown in the figure above. For more inform- ation on V+ error messages and descriptions, see the topic "System Messages" in the V+ Language Refer- ence Guide . Other features of the Pending Errors log are as follows: l The Copy button is used to copy the contents of the log, which is useful for pasting into an email or other document. l The OK button is used to close the log. ACE User's Guide, 3.6.x 18316-000 Rev A Page 1112