Resetting the Maximum Recorded Values Resetting the Maximum Recorded Values The System Monitor tool has a feature that allows you to reset the maximum recorded values for the robot being monitored. This allows you to make performance adjustments and then see if those adjustments have improved performance or not. The values that can be reset are: l Peak Torque l Peak Velocity l Peak Position Error To reset a value: 1. Right-click on the row that contains the parameter you wish to reset. A menu opens. 2. From the menu, select Reset Current Value, as shown in the following figure. NOTE: If the selected row cannot be reset, the Reset Current Value selection will be dimmed (not available). 3.
The recorded value is reset to 0. Reset Current Value Menu Item ACE User's Guide, 3.6.x, 18316-000 Rev A Page 1125 Item Description example, if 1 minute is selected, the Time scale on the graph will show 1 minute of data. Refresh Period Specifies the refresh period (how often the data will be sampled). The range is from 500 milliseconds to 1 minute.