Variable Editor ACE User's Guide, 3.6.x 18316-000 Rev A Page 136 Category Variable Type Description ACE toolbar. Controller Real Variable A V+ real value (e.g., 12.635). For example, if you've declared myvar=1, then entering "myvar" in the V+ variable field returns the value "1". Controller Signal A V+ input or output signal. This value must rep- resent a valid, installed digital signal (e.g., 1003) or a soft signal. Controller Switch A V+ system switch (e.g., POWER) Controller Parameter A V+ system parameter (e.g., HAND.TIME). Local I/O Signal A numeric variable that represents a specified local I/O signal. This provides a way to reference the I/O signal in a script.
Process Manager Clear Tracking Source A numeric value that represents a Process Man- ager tracking source. When a non-zero value is written to the variable, it will issue a clear com- mand to the selected source. Process Manager Hardware Status Code The status (error code) associated with a given Process Manager control source. This is the code associated with a source error in the Process Manager runtime control. Writing a value to this variable is interpreted as a response to the error, where: 1= retry, 4 = skip, and 8= abort. Process Manager Robot Stat- istics A numeric value that represents a robot stat- istic (for example, PPM).
Process Manager Summary Stat- istics A numeric variable that maps to runtime stat- istics of the Process Manager, like the Parts per Minute rate or the Idle Time. Process Manager Process Status A numeric value that represents a Process Man- ager process index, which can be used to enable/disable that process. Writing a 0 to this variable disables the process; a non-zero value enables the process. Process Manager Control A numeric value that represents a Process Man- ager application, which can be used to start/stop that application. Writing a 0 to this variable stops the Process Manager; a non-zero