omron — Creating a Part Configuration

Creating a Part Configuration To use a custom model: 1. Click the Display Properties drop-down list box. 2. Check Enable to activate the Shape field. 3. Click the browse ( ) icon to locate the .STL format file that you wish to use for the model. Belt Configuration NOTE: When emulation mode is enabled, this item contains additional features. For more details on Emulation Mode, see Emulation Mode on page 1089. To create a Belt configuration: 1. The Configuration drop-down list box is used to specify how the part is input to the system. Use the drop-down list box to specify "Belt". The Properties area changes to show the properties that can be used with a Belt configuration. 2.

Use the Properties grid to enter the part-location information. l Belt Properties Required. Selects the belt that is used to handle the part and describes the mode of the belt. There are three modes available: Spacing, Latch, and Vision. Each mode is shown in the following figures. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 831